Sometimes, using the only modem in a home WiFi network is not sufficient. You will experience plenty of problems and issues. Not just that, you even have to deal with weak WiFi signals. Hence, in such a scenario, you should install a Netgear router. That is going to strengthen your WiFi signals throughout the house.
With that being said, you should get through the following points. These points will guide you to install the Netgear router without any issue. Moreover, you also get to know about the correct procedure to install the Netgear router. Read on.
Steps to Do Netgear Router Setup
Unwrap Router
Start the Netgear router setup process by unboxing the router. Take the router out slowly to ensure it does not get damaged physically. Moreover, you should also get the Ethernet cable as well as the router antennas out of the box.
Locate a wall outlet and plug the router into the electric circuit. Make sure the wall outlet is working perfectly fine. Further, turn the Netgear router on by pressing the power button on the router. Wait for the LED lights to turn on and get stable.
Place the Router
The router placement further plays the most important role in the best WiFi signal range. So, keep the following points in check.
- You must always choose the central location of your house to set the router.
- Make sure there are no objects that could hamper the WiFi signals range and connectivity.
- Always check for windows while placing the Netgear router.
- You should ensure that you don’t place the router behind the T.V. or inside the wall cabinet.
Connect With Modem
The Netgear router is used to strengthen the current WiFi signals radiating around you. Hence, the connection between the Netgear router and the home modem should be strong and stable. For that, you can always use the Ethernet cable that you got with the router.
However, that is not the only way you can connect the router and the modem. You can also link both devices wirelessly. But, during the wireless connection, the placement of the router and the modem should be within the same room.
Launch Web Browser
After the hardware setup, turn on your computer. You can also use a laptop in case you don’t have a computer. Make sure the computer is getting a consistent power supply. Once the PC is on, launch a web browser. However, you need to choose an up-to-date web browser.
Not just that, you should download a web browser that is compatible with your computer. Without compatibility, you are bound to get plenty of issues. Moreover, you should check that the chosen web browser is stable and does crash often.
Enter Official Web Address
To complete the Netgear router setup process, you need to access the router dashboard. To do that, you should enter the official router web address in the web browser. Thus, type www.routerlogin.net in the address bar of the web browser.
Furthermore, you should take care of the typing errors. Also, turn off the Caps Lock key to ensure no errors are there while typing the address in the address bar. Hit the Enter key after typing in the web address.
Do Router Login
You get access to the Netgear router login page. After that, you must do the Netgear router login. Therefore, keep your default login details by your side. You should get through the router user manual to know about your default router login details.
When you have the credentials, you must enter the default username and password in the allocated spaces. Click the Log In button present on the screen. Wait for the screen to shift. You get logged into your router when everything goes perfectly right.
Follow On-Screen Instructions
When the Netgear router dashboard opens, you get plenty of on-screen messages. You should get through each message after accepting or changing the default settings. After that, complete the router setup process by implementing the changes.
Conclusion
The steps mentioned above will help you the best to perform the Netgear router setup process. Most users face challenges while accessing the routerlogin.net website. If you experience the same, you should use the 192.168.1.1 IP address. That will lead you to the Netgear router login page. So, you can easily do the setup without facing any issues. For that, make sure you follow the steps given above. After the setup, you get strong WiFi signals that improve your internet experience.
