It is not mandatory to replace broken or chipped teeth on every occasion. Composite bonding can be an excellent solution in such cases to restore the magnetic impact of one’s smile. Now you must be wondering what composite bonding is? Well, that is obvious! It is a modern dental procedure in which a special type of resin, in the colour of your tooth, is applied to a damaged or defective tooth. The aim of the procedure is not only improving your smile but also masking certain defects or flaws of the tooth.
The procedure is simple and easy. The uncomplicated treatment is also easily affordable. If you have a tooth that is defective, discoloured, flawed, chipped or broken, this might be the best solution to overcome those issues. However irrespective of your reason to get this treatment there are certain facts about this procedure that you better should know. This information will help you taking informed decision.
This blog post is the result of talking to a large number of people who have undergone either composite bonding or composite veneers procedures to fix some issue or the other. After talking to them at length it struck that almost all of them has a common line to say. They wish they knew certain things about their treatment beforehand and that would have made things much easier for them. Considering this as the takeaway, we decided something must be done quick so that people who are going to take the treatment henceforth are not kept in the dark unlike others we have talked to.
Few important facts about composite bonding
Composite bonding is not universally suitable for everyone
This fact is certainly known to everyone. The procedure is simply great for a variety of dental issues but yet it is not meant for everyone. As a matter of fact, there are certain habits and diseases that discard you as a suitable candidate for this treatment. The habits include – nail biting, clenching and teeth grinding (in dental terms it is called bruxism). Any of these conditions widen the chance of cracking the veneers.
It is also important to have strong and healthy teeth to be a suitable candidate for composite bonding. Patients with serious chips and cracks on the teeth are usually recommended for dental crowns instead of composite bonding. This is because in such cases integrity as well as the strength of the tooth can be seriously affected. Crowns – on the other hand – not only provide better support to such a tooth but also save it from cracking or any further damage.
Composite bonding is easily affordable
A section of people usually look for other smile enhancing treatments before they settle for composite bonding. What holds them back from committing to the treatment? They think the procedure to be costly. That is why they try to avoid it and search for other alternatives. This again shows the existing gap between actual facts and perceived facts. Composite bonding is a reasonably priced procedure and is highly affordable in sharp contrast to porcelain veneers.
On occasions it can be an irreversible procedure
In certain cases dentists may require scraping away a tiny portion of your tooth enamel. It may also require trimming a tooth as well as change its natural shape. Therefore, before going for the procedure, you should better be aware that it could be a little irreversible.
It is comfortable and painless
In porcelain veneers the teeth have to be drilled but as far as composite veneers are concerned there is no drilling. However, in rare and seldom cases a tooth may be needed to trim down. Considering this fact, it is pretty much obvious to think the procedure inflicts a lot of pain. But the truth is just the opposite. It is much free of pain and proves to be a comfortable procedure. Patients are administered with local anaesthesia before undergoing the treatment. Thus, you are not likely to feel any pain while taking the treatment.
A replacement could be required in course of time
Composite veneers are pretty long-lasting even with minimal care and maintenance. But these do not last lifelong. On average it goes on smoothly anywhere between 4 and 8 years. After that it may require a polish or a full replacement depending on the level of wear and tear. Therefore, you may to undergo the treatment repeatedly. But it is possible to extend its shelf-life considerably. Avoid chewing hard and crunchy substances with the front teeth. These include various nuts, candy, toasted bread, ice cube, pen tips and caps. Stop opening beer bottles with teeth. get rid of the nasty habit of nail biting.
It works on a variety of issues related to the teeth
If you think composite bonding is only meant to fix your chipped, cracked or broken tooth then you are badly mistaken! It corrects a wide range of dental conditions to enhance your smile. Other than chipped, cracked and broken tooth the procedure can fix the following issues –
- Excessively small teeth
- Misshaped teeth
- Gaps between the teeth
- Short teeth
Not as hard as your natural teeth
Before going for composite bonding treatment, you should be aware about another fact. Though composite resin is strong but it is not as strong as the enamel of your tooth. In other words, after having your treatment you must be cautious about your habits and lifestyle. No more biting down on ice cubes, fingernails, shells of nuts, candies, pen tips and such other things and items. Any of these activities may bring disaster; your dental bind be get cracked or in more severe situations may completely fall out. If you suffer from bruxism or teeth grinding, wearing a mouth guard to bed every night is crucial. The device will protect your teeth bonding from getting split because of the excessive pressure on the teeth from grinding habit.
Conclusion
An ever-increasing number of people in London rely on the Chatfield Dental Braces for consultation on composite bonding treatment. Highly skilled and experienced dentists at the practice suggest patients to gradually cut down on their coffee and red wine intake after this treatment. Composite resin material is prone to get stained and these two popular beverages are notorious for their staining capability.
